When constructing cabinets, most assume that only two types of joints are needed: edge butt joints and flat butt joints. While it is true that these are two basic ways to attach the sides of a cabinet box or the pieces of a face frame to the project, they are not necessarily the strongest or most visually appealing methods. A cabinetmaker will select the type of joint to use at any given place in the project based on the needs of that particular joint. For example, drawers often have sides that are joined by a lap dovetail joint because it is the one that is going to provide the most secure hold against the side tension of constant pushing and pulling while simultaneously supporting the weight of the drawer’s contents.